Teledyne 3000ZA, Operating Instructions Manual

Page: 47 / 81

Trace Oxygen Analyzer Operation
Teledyne Analytical Instruments 35
The screen prompts you to enter the current password. If you are
not using password protection, press Enter to accept TETAI as the
default password. If a password has been previously installed, enter the
password using the __ arrow keys to scroll back and forth between
letters, and the __ arrow keys to change the letters to the proper
password. Press
Enter
to enter the password.
If the password is accepted, the screen will indicate that the
password restrictions have been removed and you have clearance to
proceed.
PSWD Restrictions
Removed
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Change Password?
<ENT>=Yes <ESC>=No
Press Escape to move on, or proceed as in Changing the
Password , below.
4.3.3.2 I
NSTALLING OR
C
HANGING THE
P
ASSWORD
If you want to install a password, or change an existing password,
proceed as above in Entering the Password . When you are given the
opportunity to change the password:
Change Password?
<ENT>=Yes <ESC>=No
Press Enter to change the password (either the default TETAI or
the previously assigned password), or press Escape to keep the existing
password and move on.
If you chose
Enter
to change the password, the password
assignment screen appears.
T E T A I
<ENT> To Proceed
—or—
A A A A A
<ENT> To Proceed