Teledyne SP Devices ADQ8-8C, Manual

Page: 25 / 50

17-2000 C
2020-09-17
25(50)
ADQ8-8C Manual
17-2000 C 2020-09-17
25(50)
4.10 Level trigger
The level trigger allows data-driven acquisition. When the data on a selected channel crosses the trig-
ger level, all channels on the ADQ is triggered,
Figure 17 . The level trigger is set to trigger on rising or
falling edge. Here, rising edge is illustrated.
# DESCRIPTION USER COMMAND REF
a Backplane MLVDS bus
b Set direction for each port in the backplane SetDirectionMLVDS
c Output: Select output port for trigger output SetupTriggerOutput 4.12
d Output: This is the source for the trigger output signal SetupTriggerOutput 4.12
e Input: Select port for trigger sources SetTriggerMaskMLVDS
f Input: The backplane trigger signal is OR:ed from the selected ports
g Input: this is the backplane trigger to the trigger module 4.1
Figure 16: MLVDS port 17 - 20 as trigger signals.
' ( '(
'(
'(
'(
)
% *
+, -./
'(
'(
+, ./
+, -.0
+, .0
+, -.
+, .
+, -.
+, .
"
*
*
*
% **