Teledyne SP Devices ADQ8-8C, Manual

Page: 17 / 50

17-2000 C
2020-09-17
17(50)
ADQ8-8C Manual
17-2000 C 2020-09-17
17(50)
Figure 9 illustrates how the triggers are accepted or rejected in the window mode.
# DESCRIPTION USER COMMAND REF
a External trigger input signal on front panel connector. 4.8
b External sync input signal on front panel connector. 4.8
c Other available sources (see SetTriggerMode for a list).
d Select source for blocking triggers. SetupTriggerBlocking 4.5
e Before activating the trigger blocking any selected trigger may pass. SetupTriggerBlocking
f This signal is ignored as the trigger blocker is not armed
g Select trigger source SetTriggerMode
h Start receiving triggers. Note that triggers are still blocked. ArmTrigger
i The unblocking of triggers is armed and can be activated by (d). ArmTriggerBlocking
j Triggers are blocked until the first accepted blocker signal. SetupTriggerBlocking 4.5
k The trigger blocker can also be set up with a window function where
triggers are accepted or rejected during a user-defined window. SetupTriggerBlocking 4.5.1
l The trigger blocker can also be set up as a gate where triggers are
accepted during a gated time set by signal (d). SetupTriggerBlocking 4.5.1
Figure 8: Blocking and gating of triggers.
()
*+,
() $ $ *,
- $
() *,
.
/0 12.
" 3
/0 45
* ,
*,
63
*,
7 " 3
*,
*, * , *, *,
*,
*,