March 2018
rapidCAST User’s Guide
Page
60
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Disassembly and Packing
If the winch needs to be disassembled, use the following steps:
1. Power down the controller. Disconnect all cables on the controller and stow it in the Ancillaries
Case.
2. Remove the probe from the line and stow it in its case.
3. Secure the line to the spool using a piece of tape.
4. Remove the davit and stow it in its case.
5. Carefully lift the winch from the pipe mount. The cables should be removed from the winch pipe
and stowed inside of the winch prior to packing. It may be easier to remove the cover and wrap
the cables around the metal frame and the spool. Place the winch in its case.
Figure 37.
Packing the Winch
DO NOT damage the tension arm when removing or wrapping the cables around the winch.
