BASICS
32
From the Display
Choose Cursor > Cursor Setup to open the Cursor dialog.
Touch to choose Cursor Type.
Touch-and-drag cursor markers to reposition cursor.
Vertical Cursor readout appears on descriptor boxes.
Horizontal Cursor readout appears below Timebase. Drag horizontal
readout to zoom traces to place cursors on zoomed area.
Cursors
Cursors set measurement points on a trace. There are five preset cursor
types, each with a unique appearance on the display: Horizontal (Time),
Hori Vertical, Vertical (Amplitude), Horizontal (Frequency), and
Horizontal (Event). These are described in more detail in the
WaveSurfer
510 Oscilloscopes Operator’s Manual.
From the Front Panel
Press to apply cursor. Continue
pressing to cycle through all
cursor types.
Turn to adjust cursor position.
Push to select different cursor
markers to adjust.
A
B
A
B
C
D
E
A
B
C
D
E
A
B
www.
GlobalTestSupply
.com
Find Quality Products Online at:
