Teledyne Lecroy WaveAce 1000, Command Reference Manual, Page: 22 / 92

WaveAce Remote Control
ACQUISITION - ATTENUATION, ATTN
The ATTENUATION command selects the vertical attenuation factor of the probe. Values up to 1000
can be specified.
The ATTENUATION? query returns the attenuation factor of the specified channel.
Command Syntax
<channel>: ATTeNuation <attenuation>
<channel>:= {C1,C2,C3,C4,EX,EX10}
<attenuation>:= {1,5,10,50,100,500,1000}
Query Syntax
<channel>:ATTeNuation?
Response Format
<channel>:ATTeNuation <attenuation>
Example
The following instruction sets to 100 the attenuation factor of Channel 1:
C1:ATTN 100
20
920836 Rev B