In the
Wireless Devices
pane, place a check in the row of each active device
to be
analyzed. Active devices can also be selected while the recording is in progress.
Note:
Data filtered by the device selection is an "OR" function, not an "AND" function. When
selecting device1, device2, device3,… the recorded data filtered into the analyzer is data
involving device1 OR device2 OR device3 OR …However, if the Options menu, analysis of
LE Empty packets is selected an AND function is included. For example: (device2 AND LE
Empty packets) OR (device3 AND LE Empty packets).
The following table lists some common data capture and device selection scenario.
Table 4 - Common Data Capture and Device Selection Scenarios
Once devices are selected, analysis of the capture can begin.
Start Analysis
The analysis begins by clicking on the
Start Analyze
button or
selecting
Start Analyze
from the
Capture
menu. Alternatively click on the
Start Analyze
button in the
Wireless Protocol Suite
Main Window. In the Main window you can also select
Start Analyzing
from the
Capture
menu. The datasource will begin sending captured
packets involving the selected device(s) to the
Wireless Protocol Suite
software.
Once analysis has begun, you cannot change the device
selection. All device rows in the
Wireless Devices
pane are grayed-out. To stop the analysis,
click the
Stop Analyze
button. You can then change your device selection and restart
analysis by clicking the
Start Analyze
button.
To stop the analysis, click the
button in the datasource or click
the
button on the
Wireless Protocol Suite
Main window. You
can also select
Stop Analyze
from the
Capture
menu in the datasource or the
Stop
Analyzing
option in the
Capture
menu in the Main window as well.
Conducting analysis from a capture file is identical to the live capture method.
The
Wireless Protocol Suite
Main window is shown below:
Scenario
Wireless Devices Pane
Selection
Analyzing traffic between a slave
Device Under Test (DUT) and its
master
Select only the slave DUT for
analysis.
Analyzing all traffic involved in
Inquires
In the Options menu select Analyze
Inquiry Process Packets in the
Options menu
12