Record: Begin Capture
When starting a capture session:
•
the active status of all devices is cleared in the
Wireless Devices
panes,
•
the
Security
pane is emptied, and
•
the
Event Log
pane retains all prior logged events.
On the Datasource Toolbar, click on the
Start Record
button or
select
Start Record
from the
Capture
menu option. The
Start Record
button is also
available in the
Wireless Protocol Suite
main window. In the Main window you can also
select
Start Recording
from the
Capture
menu option. When the
Start Record
button
changes to
Stop Record
the
X240 hardware is capturing data from all active Bluetooth
devices within range and recording data on the PC. Depending on license/capture
configuration, only either Classic or LE will be displayed during any particular session.
On the Datasource Toolbar, clicking on the
Stop Record
button,
or selecting
Stop Recording
from the
Capture
menu options will halt live capture. From the
Main window you can click the
Stop Record
button or select
Stop Recording
from the
Capture
menu list to stop recording as well.
The
Wireless Devices
pane populates with any newly discovered devices. Selecting devices
for analysis can be done while recording.
The
Security
pane will show all encrypted Bluetooth links.
The
Event Log
pane will begin to populate with information, warnings, and error messages.
The
Status Bar
will show a running total of captured packets.
Note
: Starting a new capture session will clear all unsaved data from both the X240 hardware and the
Wireless Protocol Suite. If it has not been saved, then a pop-up warning message will appear.
Selecting Devices for Analysis
Once a capture session starts by clicking Start Record, data from all active devices within
range are being captured. To analyze the data using the
Wireless Protocol Suite
, select
specific devices of interest to include in the analysis.
Wireless Devices Pane
10
11