Attach Antennas
Frontline X240 Antenna Attachment Points on Front Panel
Remove the Frontline X240 hardware from the box and attach the three
ANTENNAS
to the
SMA connectors on the front panel. The base of the antennas can be carefully rotated by 90
degrees, so that the antenna points upward.
Applying Power
Frontline recommends that the X240 hardware be powered by the supplied PD adapters or
equivalent. Connect the USB C cable to the connector labeled
Power
on the back panel of
the X240.
To apply power to X240 hardware depress and release the Power button on the front panel.
This action will provide a clean start for X240 hardware. The front panel
Power
indicator LED
will be a constant green. Should the front panel
Power
indicator begin blinking red, the X240
hardware is approaching thermal overload temperature between 70° C and 80° C (158° F and
185° F) and should be shutdown. When the hardware reaches thermal overload it will
automatically shut down and the
Power
indicator will turn off.
Antenna Attachment Points
5
6