2. Rear Panel Connectors
The rear panel is shown below. The panel provides connectors for external power and for a
connection to the computer hosting the
Wireless Protocol Suite
software.
Frontline X240 Rear Panel Connectors
Host:
USB C 2.0/3.0 port for connecting X240 to the host computer where the
Wireless
Protocol Suite
resides. This connector provides host computer command, control, and data
transfer. If the USB cable is connected to a computer with a USB C 3.0 with power delivery
or higher then the X240 can be powered through this port as well and will not need a USB
cable connected to the Power connector on the X240.
Power:
Type C PD power adapter - preferably the adapter/s supplied with the X240 is
required.
Ethernet:
The Ethernet connector is for a future release to support PoE (Power over
Ethernet) and Host communications.
MicroD25:
The MicroD25 connector will be used in a future release to connect an X240 to
another X240 to be able to provide Dual technology (BLE & BR/EDR as an example)
captures time synced via CrossSync.
Note:
At this time the Ethernet and MicroD25 connectors are inactive.
Host
Power
MicroD25
Ethernet