Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 73 / 348

Figure 4.3 - Example: Poor Capture Environment
4.1.2 Capturing Data with BPA 600 Analyzer
So, now we have our ComProbe BPA 600 analyzer installed, devices under test turned on and identified in
BPA 600 datasource ; it is time to sniff the communication between the devices and capture data.
Once you have completed the Devices Under Test selection, you are ready to capture data.
1. Select
Start Sniffing
on the
Datasource
dialog from the toolbar (Figure 4.4) .
Figure 4.4 - Start Sniffing from Datasource Toolbar.
2. Begin the pairing process between the devices (Only if you are using Classic or Classic/low energy.
Low energy by itself does not require that devices be paired.)
As data is being captured, the
Capture Status
message in the
Control
window indicates the synchronization
status of the ComProbe BPA 600 analyzer as well as the Master-Slave relationship. The colored arrows change
depending on the synchronization state and the direction of the arrow points from Master (arrow tail) to Slave
(arrow head). There are five states:
Arrow Description
Blue = synchronized with the Master clock - link active.
Table 4.1 - BPA 600 Roleless Arrows
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
65 Frontline BPA 600 Hardware & Software User Manual