Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 107 / 348

3. Select
Include
or
Exclude
radio button.
Now you can set the conditions for the filter.
4. Select the initial condition for the filter from
the combo box at the bottom of the dialog for
Select each frame.
5. Set the parameters for the selected condition
in the fields provided. The fields that appear in
the dialog box are dependent upon the
previous selection. Continue to enter the
requested parameters in the fields provided
until the conditions statement is complete.
Figure 4.26 - Two Filter Conditions Added with an AND Operator
6. Click the plus icon on the left side of the dialog box and repeat steps 4 and 5 for the next
condition. Use the up and down arrow icons on the left side of the dialog box to order your
conditions, and the delete button to delete conditions from your filter.
7. Continue adding conditions until your filter is complete.
8. Include parentheses as needed and set the boolean operators.
9. Click
OK
.
10. The system displays the Save Named Condition dialog. Provide a name for the filter condition or
accept the default name provided by the system and click OK .
Figure 4.27 - Save Named Filter Condition Dialog
The Set Condition dialog box closes, creates a tab on the Frame Display with the filter name, and applies
the filter.
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
99 Frontline BPA 600 Hardware & Software User Manual