Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 52 / 348

2. Select (click on and highlight) the template marked for deletion and click the
Delete
button.
The system removes the selected template from the list of saved templates.
3. Click the OK button to complete the deletion process and close the Delete dialog.
4. Click the
OK
button on the
Set Initial Decoder Parameters
window to apply the deletion and
close the dialog.
3.2.2 Selecting A2DP Decoder Parameters
Decoding SBC frames in the A2DP decoder can be slow if the analyzer decodes all the parts (the header, the
scale factor and the audio samples) of the frame. You can increase the decoding speed by decoding only the
header fields and disregarding other parts. You can select the detail-level of decoding using the
Set Initial
Decoder Parameters window.
Note: By default the decoder decodes only the header fields of the frame.
1. Select
Set Initial Decoder Parameters
from the
Options
menu on the
Control
window or the
Frame Display
window.
2. Click on the A2DP tab.
3. Choose the desired decoding method.
Figure 3.22 - A2DP Decoder Settings
4. Follow steps to save the template changes or to save a new template.
5. Click the
OK
button to apply the selection and exit the
Set Initial Decoder Parameters
window.
3.2.3 AVDTP Decoder Parameters
3.2.3.1 About AVDTP Decoder Parameters
Each entry in the Set Initial Decoder Parameters window takes effect from the beginning of the capture
onward or until redefined in the Set Subsequent Decoder Parameters window.
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 44