Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 46 / 348

Figure 3.16 - BPA 600 Advanced Classic Settings
1.
ComProbe
Some packet types can be so numerous that they may make it more difficult to locate data packets in
the
Frame Display window. You have several options to exclude certain types of packets.
l
Filter out ID packets - When this is checked, all ID packets are filtered out.
l
Filter out Nulls and Polls
- When this is checked, Nulls and Polls packets are filtered out.
l
Filter out SCO/eSCO - When this is checked, SCO/eSCO packets are filtered out.
l
Prioritized Decryption
can be selected if you are having trouble establishing the correct
decryption. This option adjusts the data capture to give priority to establishing the proper
decryption over receiving frames. If you select this option, some frames may be dropped, but
establishing the decryption key will be more efficient.
l
Sniffer Diagnostics - When this is checked, some diagnostic data from the ComProbe are
captured and stored in the .cfa file. This is useful when a .cfa file is sent to Frontline for analysis and
diagnosis. Technical Support may ask you to check this option when you are experiencing issues
with BPA 600.
l
Single Link Filtering - When this is checked, only packets from the specific Master and Slave
selected in Devices Under Test are displayed. Data from other devices that may be connected to
the Master will be filtered out.
2.
Frame Slicing Settings
l
Frame Slicing Settings allows you to enter the size of the largest frame allowed to pass the
analyzer without having any bytes removed. The second field tells the analyzer the number of
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 38