Syringe Pump Module Installation Guide
Chapter 4: Safety and Regulatory Information
21
personnel for loose or damaged parts. See individual parts lists for approved
replacement parts.
Mains Disconnect
The power switch on the rear panel is not the mains disconnect. Power mains
disconnect is accomplished by unplugging the power cord at the instrument or
at the wall outlet. Ensure the power cord is easily accessible and removable, in
the event of an emergency which requires immediate disconnection.
WARNING
SHOCK HAZARD
Ensure that power cord is disconnected before removal of any covers.
Mechanical Hazards
If you insert any part of your body between the moving parts of the syringe
pump, you could be injured.
F
IGURE
4-1
Overview of the Mechanical Hazards
CAUTION
1 - PINCH HAZARD
Keep fingers, hair, and loose clothing away from the moving parts.
Operating Environment
WARNING
SHOCK HAZARD
To reduce the risk of fire hazard and electrical shock, do not expose the unit
to rain or humidity. To reduce the risk of electrical shock, do not open the
cabinet. All maintenance is to be performed by an Authorized CETAC Service
Provider.
Protection provided by the equipment may be impaired if the equipment is
used in a manner not specified by the manufacturer.
WARNING
SHOCK HAZARD
Equipment is not intended for wet locations. Miscellaneous liquids in the
equipment could cause hazardous conditions.
1
