18
Teledyne API Model 480H O
3
Monitor User Manual
09421A DCN8343
1.
Connect the power cord to an appropriate power outlet or hardwired connection (see
the serial number tag for correct voltage and frequency).
WARNING
Verify that the instrument specification for proper line
voltage and frequency is followed. Observe local electrical
codes when connecting power to the monitor
.
2.
Turn on the 480L by applying power to the monitor. The front panel display will light
and display a Teledyne splash screen. The home screen will display the ozone
concentration and flow after the monitor begins taking stable readings.
3.4. ELECTRICAL I/O CONNECTIONS
The I/O connectors are located internally in the instrument. See Figure 3-4 for their
locations. Connection to these terminals is usually made via a conduit connection to
the enclosure. There are two conduit penetrations on the enclosure, and an
additional penetration can be added to one of the walls of the enclosure if needed.
