Teledex E103IP RediDock, User Manual

Page: 12 / 41

12
1) Public
2) Private
2.3.4.5 Detect-server
2.3.4.6 Dtmf-mode
2.3.4.7 Interval-time
2.3.4.8 Swap-server
2.3.4.9 RFC-version
2.3.4.10
Signal-Port
2.3.4.11 Stun
1) Switch
2) Addr
3) Port
4) Expire Time
2.3.5 DSP
2.3.5.1 Codec
2.3.5.2 Handdown-time
2.3.5.3 Dtfm-Volume
2.3.5.4 Input-Volume
2.3.5.5 Output-Volume
2.3.6 System
2.3.6.1 Save
2.3.6.2 Reboot
2.3.6.3 Set Default
2.3.7 Other Setting
2.3.7.1 Syslog
1) Switch
2) Server-IP
3) Server-Port
2.3.8 Setting catalog
1. Pressing down the “ Menu ” key to enter the setting status of speed dial key
and input the needed saving No., then press the corresponding speed dial key to
save.
2. Pressing down “ Menu ” above 3 seconds to enter the setting status and the
default keyword is 123, and then you can press “ Enter ” to enter, “ Menu ” to exit.
3. When modifying the setting, press “ Redial ” to enter modification status, and
“ 0 ” is to make no choice, “ 1 ” is to make choice, “ Enter ” is to confirm the modification,
and “ Menu ” is to quit the modification. After finished the modification setting, we
will save it on “ Save ” menu. After rebooting all the settings will be go into effect.