ONEMINI
F
IRE
A
LARM
C
ONTROL
P
ANEL
U
SER AND
I
NSTALLATION
M
ANUAL
-
R
EV
.
1.0.3
/
2018
P
AGE
62
Settings
Settings are described below.
Parameter
Description
Detectors
Member loop and address
Modules
Member loop and address
Zone
Zone number
ONERING
Select the interessed panel and the necessary device (detector, module, zone,
ecc)
Event
Select the event type.
Detector:
Allarm
Fault
Disablements
Module:
Allarm
Pre-Allarm
Fault
Disablements
Technological
Logic
function
Number of another logic function that activates this one.
Delay
Delay time, in seconds, between logic function activation and output activation.
Length
Output activation time, in seconds.
If set to 0000, the outputs will remain active until the operator will reset them.
Output Zone
Associate
Outputs activated by logic functions.
These outputs must already be programmed (see
10.5 Output
zones
).
Procedures
To create a logic function:
1. Select the
Add
option: a list of available logic functions is displayed.
2. Select the first available logic function: the page where the logic function can be built
appears.
Summary of Contents for ONEMINI
