Teledata s.r.l. ONEMINI, User And Installation Manual

Page: 30 / 88

ONEMINI
F
IRE
A
LARM
C
ONTROL
P
ANEL
U
SER AND
I
NSTALLATION
M
ANUAL
- R
EV
. 1.0.3 / 2018
P
AGE
28

FDVCP500 (40800) call point

FDMM10 (40100-m) supervised input module

FDMM01S (40010-m) supervised output module

FDMM02 (40002-m) form C output module

FDS500 (40300) addressable sounder

FDW2W transceiver for wireless devices
FDMM12 (40102-m) Input/Output module
FDMM11S (40110-m)
supervised input/output module
FDXMM11S (40110) supervised input/output module
FDMC404 (40110) 4 input 4 output module
FDMC602 (40602) 6 input 2 output module
FDVCP500IP67 (40801) call point resettabile allarm
FDCWS100AV
Electronic sounder with addressable flashing
FDVFI100 (40330) Addressable LED flashing
FDVMCZ500 (40500)
Remote addressed indicator
FDVBLS100/32 32 tone sounder
SF100 Conventional optical detector
SF200 Conventional optical and thermal smoke detector
SF400 Conventional thermal smoke detector
BSE100 conventional base
BRL100 relè base
All the above mentioned devices can be addressed by means of the appropriate
programming tool
FDVPU1000 .
By means of the same tool it is also possible to read some basic parameters of the different
devices, and to program the type of functionality of the temperature detectors SF3500.
For more information about this tool, please refer to its dedicated manual.
Follow the instructions below:

All above mentioned devices are provided with an incorporated line insulator. This
element, inside the devices, is connected to the line. It is therefore necessary to strictly
observe the line wiring instructions (line-input, line-output) when any kind of device is
going to be connected to the loop, as described in the data sheet attached to the
device.

It is necessary to strictly observe the instructions concerning the input/output loads
connection described in the data sheet of all input/output devices (I/O modules)
It is also possible to manage, by using FDW2W, the following wireless devices:

SWF1000 optical smoke detector

SWF2000 optical and rate of rise detector at 58 °C (class A1 and A1R)

SWF3500 temperature detector, (class A1R and B)

FDWVMI100 supervised input module

FDWVMI120 output module

FDWMCB100 battery powered output module

FDSGLSP100 addressable sounder

FDWCP100 call point
It’s possible to connect the following Apollo’s device on the loop: