SHDSL.EVB.4CH User Manual
Revision: 1.0.0, 2019-02-05
29/37
5.3.4
Configuring the system
Changing settings is done in two steps. First the configuration is changed and in a second step
it must be activated. The show command provided in the /iface/shdsl directory will display both,
the current configured and the active (currently running) settings. Differences between them
are indicated by an "#" sign.
The following example shows SHDSL parameters, after the mode has been modified from CO
to CPE (with command: "iface/shdsl/mode cpe")
Figure 16: CLI example for show modified SHDSL configuration
All configuration options related to the IP interface can be found in the directory /iface/net.
Network can either be used on SHDSL line side or system side (Ethernet port) of one SHDSL
Configuration.
The following example changes IP address, netmask, gateway and side of the network
interface.
