SHDSL.EVB.4CH User Manual
Revision: 1.0.0, 2019-02-05
26/37
SHDSL Configuration:
=======================================================
Active: yes
Lines: 1,2,3,4
Masterline: 1
CO/CPE: CO
TC Layer: EFM
Ext. rates: Disabled
Lineprobing: Disabled
Bitrate min: 192 kbps
Bitrate max: 192 kbps
PAM: 16-TCPAM
Annex: ANNEX_B
SNRM: 6 dB
#######################################################
Please note, there is a special behavior in Microsoft Windows environment. The COM port
initializing happens during the connection to the USB port. During this process you get the
COM port number and then you can assign a terminal program. So, it is possible you miss the
first notifications.
Further a reset of SHDSL.EVB.4CH initiates a new initialization of the COM port. Your
connection to the terminal program will be lost.
5.3
CLI - Command Line Interface
The command line interface (CLI) is an advanced user interface with session-management
and auto-completion. The CLI has a CISCO
®
-like syntax. With it an advanced configuration
and status management is possible. The CLI has a VT100 emulation for UART, USB and
Telnet.
The focus of the CLI was at:
•
a hierarchical organization of (sub-)menus and commands,
•
a command history,
•
auto-completion of commands which are unique,
•
password protection.
5.3.1
Login
The login to SHDSL.EVB.4CH via CLI is password protected. Every unit has its own password
and it depends on your serial number. The following output will be displayed:
## Thanks for using our SHDSL evaluation board. Please register ##
## to get your password for free. Send your serial number and ##
## your contact information to [email protected] ##
please enter password
password:
Please contact us at
, and we can provide you your password. When
you have changed the first password into your individual password the output will be
deactivated (please see chapter 5.3.3).
The next password input will be delayed after wrong password.
If a user was successfully authenticated his session is exclusive - Simultaneous login attempts
from other interfaces will be suppressed. Unused CLI sessions will be terminated after 5
minutes of inactivity.
