CellFax Plus Installation and User Manual
23
4.4.7
Hotline call number
1 Set the hotline call number
Command#*65*hotline Number#
Description On lifting the handset the stored number will be dialed automatically.
2 Set the hotline dialing time
Command#*66*seconds#
Description Sets the required time in second 1 to 10 before the stored number is
dialed.
3 Turn Hotline Off
Command #*66*0#
4.4.8
Emergency call number
1. Set the emergency number 112
Command #*672*n#
n=1, all emergency numbers dialled will be 112
(default)
n=0 will not dial 112.
2. To add the emergency call number
Command #*67*n#
Set the emergency call number, n = emergency number up to 12 digits
Note: Before you can change the Emergency number you are required to remove 112
by entering command #*672*0#.
3.
Delete all the emergency call number
Command #*670#
Description: deletes all the emergency number that was set.
4.
Show all the emergency call number(require LCD)
Command #*671#
Description: Show all the emergency number that was set.
NOTE: Emergency Calls
This terminal operates using GSM signals, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on the terminal equipment for
essential communications such as medical or emergency services.
NOTE: Check with your Network provider if emergency services are available.
Command (*|#|*#|**|##) 004*DN*BS#
Description GSM diverting call under all terms
1.
GSM outgoing call limiting
Command (*|#|*#) 33*PW*BS#
Description GSM outgoing calls are limiting
2.
GSM international call restriction
Command (*|#|*#) 331*PW*BS#
Description GSM restrict the outgoing international call
