CellFax Plus Installation and User Manual
20
4.4
Telephone Keypad Configuration Commands
User may enter commands by using telephone keypad of a telephone connected to the
Phone socket on the back panel of the unit as follows:
1. Lift Receiver
2. Enter Command – a confirmation tone will then be heard
3. Replace Receiver
4.4.1 System Configuration
1.
Set system date
Command #*20*y*m*d#
Set the system date, y means year, m means month, and d means day
2.
Set system time
Command #*21*h*m*s#
Set the system time of the device, h means hour, m means minute and s means
seconds.
3.
Set work mode
Command #*1*working mode#
Set the work mode of Cellfax Plus: Working mode = 0 is voice mode. 1 is voice/fax
mode. 2 is PBX Trunk mode. 3 is PBX extension mode
4.
Set dial mode
Command #*333*n#
Set the terminal dialing mode, n=0 is audio dial mode; n=1 is pulse dial mode.
5.
Set auto-dialing delay
Command #*3*seconds#
Set up dialing time and auto sending-out time upon completely entry of numbers,
default setting 3 seconds.
<seconds> Set point range 1-20 sec
6.
Set external line flash key delay
Command #*4*<flashDelay>#
Set external line flash key delay, default, 700ms delay
<delay> 0~2000
ms
7.
Set GSM output voice volume
Command #*53*volume#
Set GSM output voice volume. Volume = 0 ~ 4.
8.
Set overtime of Button R
Command #*85*n#
Set time of Button R, This feature is only available in the SIM card used by the open
call waiting function effectively. Default, 2 seconds
<n> 1~5 seconds
9.
Set FAX and Voice Ring both ports
Command #*68*n#
n= 0 for separate ringing (Fax calls ring on FAX port, Voice calls ring on PHONE port)
n= 1 for both to ring (Fax and Voice calls ring on PHONE port and FAX port).
10.
Minute Prompt
