CellFax Plus Installation and User Manual
10
4.2 Fax function
4.2.1 Sending a fax
User can send a fax by attaching a regular G3 Analogue fax machine to the Fax port on the
back panel of the Cellfax Plus unit.
Note: Some older Fax machines cannot send the identification tone and the user must add
the Command *01* before the number to prompt the system that this call is a FAX call.
Note: the Cell-FAX does not support using voice and fax functions in the same call.
When sending a Fax press Start key immediately after dialing to set the mode to Fax.
4.2.2 Receiving a fax
User can receive a fax by attaching a regular G3 Analogue fax machine to the Fax port on
the back panel of the Cellfax Plus unit.
The device supports two fax receiving mode: synchronous mode and asynchronous mode.
the mode can be set using a keypad command (see section 4.4.2).
Note: Ensure that the SIM card in the unit has a separate Fax number for receiving faxes.
4.3 Data Function
User can transmit data by attaching a regular Analogue Modem to the phone port of the
Cellfax Plus
Alternatively the Cellfax Plus can be attached to a PC via the Serial port using the DB9 to
DB9 serial cable. This will allow the PC to communicate with the Cellfax Plus as a Standard
Modem and also to use the GPRS features of the unit.
To set up your PC to connect to the Cellfax Plus unit via the serial port use the following
instructions:
