Telecom FM OneStream BRI Page 50 Programming Manual Download

Page: 50 / 79

OneStream Programming Guide

4.5.5

ISDN Settings

Clock Source

Select the ISDN port to use as the clock source for all other ports.

National Prefix

Set the prefix for National Calls (default is 0).

International Prefix
Set the prefix for International Calls (default is 00).

Send Date in L3 Connect Message

Set whether the OneStream will send its current system date in Layer 3 ISDN connect messages.

Save ISDN Settings - click the button to apply the ISDN settings.

4.5.6

Other Advanced Settings

Emergency Numbers
Specify any numbers that are used to dial to emergency services. If these numbers are routed to

GSM then the call will be attempted even if there is a GSM lock or call barring in place.

Save Other Advanced Settings - click the button to apply the other advanced settings.

Summary of Contents for OneStream BRI
















































































Search results

Summary of Contents for OneStream BRI

Reviews:

Related manuals for OneStream BRI

Brands by name

Popular brands

Telecom FM OneStream BRI, Programming Manual

Search results

Summary of Contents for OneStream BRI

Reviews:

Related manuals for OneStream BRI

Brands by name

Popular brands