OneStream Programming Guide
41
Options Section
Modified Originating Address (Optional)
If left blank, the originating address will be left unchanged. If an address is entered here
this address will be presented in place of the original originating address.
Modified Display Name (Optional)
If left blank, the display name will be left unchanged. If a name is entered here this name
will be presented in place of the original display name.
Allow Call Transfer (Optional)
Tick the allow call transfer check box to enable call transfer. Refer to Section 5.1 – Virtual
Extensions for more information on this feature.
Timeout
Specify the number of seconds to wait for the call to be answered before attempting to ring
the next destination. If there are no more destinations then the call will end if there is no
answer within the specified number of seconds. If the timeout is set to 0 then the call will be
allowed to ring until either the caller hangs up or the destination terminates the call.
Use CallBack
Enable the CallBack feature for this route. CallBack works as follows:
1.
When a call arrives and is matched to this route the call will be rejected
2.
The destination specified in the “To” section is then dialled
3.
When the destination answers they will hear “please wait while the call is connected”
4.
The original caller will then be called back and the 2 parties connected.
To Section
The following 3 options apply to the destination of the call:
To Group (Required)
The Group that calls will be sent to when this Route is matched.
Modified Destination Address (Optional)
If left blank, the destination address will be called exactly as dialled. If an address is
entered here this address will be called in place of the original destination address.
Strip digits (Optional)
Select the number of dialled digits to be removed from the beginning of the destination
address. For example, if Strip Digits is set to 2 and the number 012345678 is dialled the
actual number called will be 2345678.