manualshive.com logo in svg

Telecom FM OneStream BRI, Programming Manual, Page: 53 / 79

Share
Download
Telecom FM OneStream BRI Programming Manual Download Page 53

OneStream Programming Guide 

  53

4.6.3

 

Sent Messages 

 
The Sent Messages shows a list of all the messages that have previously been sent. It will show the 

date and time the message was sent, the number that sent the message and the message text (if 

the message is long, only the first few characters are displayed - click the View button to read the 

whole message). 

 

The following options are available for each message: 

 
View 

  - click to display the message in the message area at the top of the page 

 
Forward 

 - click to start a new message in the message area at the top of the page, the message 

text will be filled in automatically (it can be edited) 

 

Delete    - click to delete the message. The message will be displayed in the message area at the 

top of the page for confirmation - click the "Delete" button under the message to confirm that it 

should be deleted 
 

Summary of Contents for OneStream BRI
















































































Reviews:

No comments