NO. CHECK ITEM
ACTION
EXPECTED RESULT
REPAIR
SUGGESTION
* 23 Alternate Point
Answering
Call station A
from station B,
then go Off Hook
and dial station
A’s number at
station C.
ICM LED at station C
lights steadily.
The call is answered by
station C.
3.6.32
3.6.33
Go On Hook at all
stations.
ICM
go out.
* 24 ICM Busy
Set up maximum
number of
aneous intercom
calls.
All calls can be answered
‘handsfree’.
ICM LED goes steady at every
station.
(Except those receiving
intercom calls.)
3.6.21
3.6.34
Go On Hook at
all stations.
ICM
go out.
Note:
Maximum number of simultaneous intercom calls is 4 for 6 if EXPB-B/D equipped)
minus the number of DSS Consoles, as an intercom link is reserved for each DSS
Console.
* 25 HOT LINE Call
Lift handset and
HOT LINE LED lights steadily
3.6.35
(if programmed)
operate HOT LINE.
at originating station.
2) HOT LINE LED slow flashes at
60 IPM at called station.
Five tone bursts are
3.6.36
heard through handset of
calling, and through speaker
of called stations.
Lift handset and
operate HOT LINE
at the called
station.
Go On Hook.
1) HOT LINE LED at the
called station lights steadily.
Both stations can talk.
* 26
Intercom
Conference
Call station A
from station C.
At station A, go
Off Hook and
operate ICM.
Depress ADD ON at
station C.
After depression of ADD ON,
hear intercom dial tone at
station C.
3.6.37
Call station B
from station C.
At station B,
go OFF-HOOK and
operate ICM.
Operate ADD ON at
station C.
After depression of ADD ON,
3.6.38
a short intrusion tone is
heard.
2) The three stations can converse.
Station C goes
On Hook.
Go On Hook at all
stations.
1) Stations A and B can still
converse.
3.6.39
1
110
ISSUE 1