GHN-AT-PROG-UPLC-3-SLOPE Reference Manual
Page 2 of 12
4.0
Before You Begin
Control of the Model GHN-AT-PROG-UPLC-3-SLOPE PLC 3-Channel Attenuator with Slope Filter (referred
to as the device) is accomplished through a Command Line Interface (CLI) or the PLC Test Center Graphical
User Interface (GUI). Options available include the ability to set the attenuation and slope filter values for one
to three channels, on each of one to nine devices.
All devices to be controlled must be connected to USB ports in the host PC (referred to as the system). Each
device is identified with a serial number by default. This ID number can be changed to a custom User ID
number.
Value Definitions:
UserIDNum
a user-assigned identifying number for a device
ChannelNum
the number of a channel (or a range of channels)
AttnValue
the attenuation value for a channel (or range of channels) on one (or a range) of devices
SlopeFilterState
the state of a specified slope filter on a channel (or range of channels) of one (or a range)
of devices
newUserIDNum
the new user-assigned identifying number for a device
