GHN-AT-PROG-UPLC-3-SLOPE Reference Manual
Page 7 of 12
6.0
Control
6.1
CLI Overview
The CLI allows the user to send commands to set the attenuation and slope filter values on each device. All
devices must be connected to the system.
➢
When the user connects any Telebyte device to the system, the
Refresh
command is used to update the
device list.
6.1.1
CLI Commands
6.1.1.1
Screen Examples
•
Commands are entered at the
Telebyte ATT-PROG-3>
prompt as shown below.
