TeleAdapt TA-7630, Installation Manual

Page: 7 / 32

TA - 7630 and TA - 7730 Installation Manual
Last Revised: 9/30/11 10:47 AM
7
Electrical Requirements
A 120 - volt, 60Hz, 15 - Amp electrical supp ly is required for the TA - 7630. A standard
duplex (2) 120 - volt, 60Hz, 15 - Amp electrical supply is required for the TA - 7630 plus
TA - 7500L .
Care and Maintenance
Though TeleAdapt MediaHubs are designed for durability, they still remain complex
electronic devices. As such, care needs to be taken with how they are handled. The
following are tips to care for your system:

If the MediaHub has visible smudges, fingerprints, or other foreign material, you
can clean it by using a soft clean cloth such as a lens or eyeglass cleaning
cloth.

Slightly dampen a corner of the cloth with water and wipe off the unit housing to
loosen any dirt or foreign material. Using a dry portion of the same cloth, wipe the
housing to dry.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
MediaHub.

Your TeleAdapt MediaHub should never be positioned or installed anywhere
where it could get hit, dropped, or banged around.

Do not drop, knock, or shake the device. Rough handling can harm internal
operations.

Your MediaHub should be dry. Liquids or moisture can cause damage to internal
ele ctronic circuits. If your unit gets wet, immediately remove power allowing the
unit to dry before re - applying power.

Do not store the MediaHub in hot areas. High temperatures can shorten the life of
electronic components and warp or melt certain plastics.

Do not attempt to open the MediaHub gaining access to the internal
infrastructure. Please notify TeleAdapt service and support personnel regarding
return materials authorization policy.