Tele Radio PN-R15-1, Manual

Page: 84 / 92

LOAD AT START-UP
NOTE! We recommend starting with Load select before selecting load at start-up.
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
Top LED flashes (green).
5. WITHIN 1 MINUTE FROM PULLING OUT THE STOP BUTTON:
Enter the code: 1-2-3-4 (press the buttons 1, 2, 3, 4).
The transmitter LEDs 1- 4 (red) light up. If the code is invalid, the transmitter turns off. If the code is
accepted, the top LED flashes (green), The transmitter LEDs 1-4 (red) starts to flash.
6. WITHIN 1 MINUTE FROM ENTERING THE CODE:
Press button 8. Keep pressed.
7. Press button 6. Release.
8. Release button 8.
The top LED lights (green). LED 2 (red) flashes.
9. To select Load at start-up, press a button according to the table below:
Press... for Load at start-up...
Button 7 none
Button 1 A
Button 2 B
Button 3 A+B
- 34 -