Tele Radio PN-R15-1, Manual

Page: 59 / 92

FUNCTION LEDS INDICATION IN OPERATING MODE
Function LED Off On Indicates
7 (red)
x Not compliant with PL d
x Compliant with PL d
8 (red)
x No transmitter is registered.
x
Flashes once: One or more transmitters are registered. No radio transmission
established.
x
Double flash: One or more transmitters are registered and logged in. No radio
transmission established.
x Radio transmission established.
9 (yellow) x Receiving a radio packet from a transmitter other than a Panther.
9 (yellow)
10 (green)
x
Receiving a radio packet from a transmitter set to the radio mode different from
that of a receiver.
9 (yellow)
11 (orange)
x Receiving a radio packet from a transmitter that is not registered.
10 (green) x Receiving a radio packet, low signal (RSSI).
11 (orange) x Receiving a radio packet, configuration ID not accepted.
10 (green)
11 (orange)
x Receiving a radio packet, custom ID not accepted.
9 (yellow)
10 (green)
11 (orange)
x
1. Receiving a radio packet from a registered transmitter. The receiver is
already controlled by another registered transmitter. NOTE! "Radio link" must
be activated in the receiver.
2. Load select mode is activated. Incorrect Load is selected on the transmitter.
TECHNICAL DATA
Number of stop relays 2 (potential free*, 6A, 250V AC)
Number of function relays
PN-RX-MNA4, PN-RX-MNB4: 4
PN-RX-MDA10, PN-RX-MDB10: 10
(potential free*, 10A, 250V AC)
Input power
PN-RX-MNB4, PN-RX-MDB10: 48-230V AC
PN-RX-MNA4, PN-RX-MDA10: 24-48V AC
Digital inputs 0
Duplex communication No
Max. number of registered transmitters 8
IP class 66
Size 120 x 117 x 51 mm / 4.7 x 4.6 x 2 in
Weight 400 g / 0.8 lbs
Operating temperature -20 - +55 °C / -4 - +130 °F
Operating frequency 2405-2480 MHz
Number of channels 16 (channel 11-26)
Channel separation 5 MHz
Antenna 1 internal PCB antenna
* potential free means that you have to supply voltage to get voltage out of a relay.
- 9 -