Tele Radio PN-R15-1, Manual

Page: 71 / 92

Switch channel
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE FROM PULLING OUT THE STOP BUTTON:
Enter the code: 1-2-3-4 (press the buttons 1, 2, 3, 4).
LEDs 1- 4 light up (red). If the code is invalid, the transmitter turns off. When the code is accepted, the
top LED flashes (green). LEDs 1-4 flash (red).
6. WITHIN 1 MINUTE FROM ENTERING THE CODE:
Press button 8. Keep pressed.
7. Press button 4. Release.
8. Release button 8.
The top LED lights (green). LED 2 flashes (red).
9. Select channel 11-26.
For example: Press button 2 for the first digit in channel 20. To enter the zero, press button 8. Keep
pressed. Press button 4. Release button 4. Release button 8.
Press button... for digit...
1 1
2 2
3 3
4 4
5 5
6 6
8 (shift)+1 7
8 (shift)+2 8
8 (shift)+3 9
8 (shift)+4 0
LED 3 lights (red) when a valid digit has been entered.
LEDs 3 and 4 light (red) when two valid digits have been entered.
The top LED flashes (green) 3 times. The transmitter turns off.
- 21 -