elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
85
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
You can expand or change the settings for call transfer as follows:
u
Transfer Call by On-Hook
: The two participants are connected with one another when you
press the end call
a
key. The intermediary's connections with the participants are
terminated.
u
Use the R key to initiate call transfer with the SIP Refer method
: Deactivate call transfer
with the R key if you want to assign a different feature to the R key (see below "
key functions for VoIP (hook flash)
")
u
Specify how target addresses are selected in the SIP protocol:
¤
Determine target address automatically
The participant is automatically determined by the number entered and the SIP information.
¤
Derive target address
You specify how the target address is to be determined:
– from the SIP URL
– from the SIP contact header
u
Specify whether the first call is to continue while the second participant is being called, when
a call is forwarded. There are two ways of doing this:
–
For attended transfer
: This procedure ensures that the call actually takes place.
–
For unattended transfer
: The first connection to the participant is ended after the call is
transferred.
Defining R key functions for VoIP (hook flash)
Your PABX/VoIP provider may support special performance features. To make use of these
features, your phone needs to send a specific signal (datapacket) to the SIP server. You can
assign this "signal" as the R function to the R key on the handsets.
¤
Enter the data received from your provider in the
Application Type
and
Application signal
fields.
If the user presses this key during a VoIP call, the signal is sent.
Please note
For IP telephony, the call is transferred via the SIP protocol.
The unique address is derived from the SIP-URL (SIP-URI). As well as the SIP-URL, the SIP
contact header contains additional information for transferring data between the sender
and recipient.
Please note
Settings for the R key are only possible if
– The R key has not been activated for call transfer (
– SIP Info has been activated (
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
