elmeg DECT200 Multicell System / en / elmegDECT200M_en / telephony.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
30
elmeg DECT200 Multicell System
bintec elmeg
Making calls
Display with CNIP
Display with CNIP and CLIP
Notes on phone number display (CLIP)
By default, the number of the caller is shown on the handset of your telephone. You do not have
to make any other settings on your telephone.
However, if the caller's number is not displayed, this can be due to the following:
u
You have not requested CLIP from your provider
u
The PABX connected to the elmeg DECT200 Multicell System is not forwarding all the
information.
¤
Check the CLIP (phone number display) settings of your PABX and activate this function if
necessary. In the user manual for the device, search for the term "CLIP" (or an alternative term
such as "calling line identification", "phone number identification", "caller ID" etc.). If
necessary, contact the device manufacturer/supplier.
¤
Check whether your provider supports phone number display (CLIP) and that the function
has been activated for you. If necessary, contact your provider.
If you have CNIP, the CNIP information
registered with your provider for the caller's
number will be displayed, e.g., the name and, if
applicable, the location.
If CLIP and CNIP are activated, the respective
details are displayed one below the other.
If the number of the caller is stored in your
directory, the CLIP display is replaced by the
corresponding directory entry.
Ø«Ú
Doe, John,
Berlin
Reject
Silence
CNIP text, e.g.,
name and location
Ø«Ú
1234567890
Doe, John,
Berlin
Reject
Silence
CNIP text
CLIP information
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
