TELCOSAT RPT 900
Document use is restricted to that described on cover
24
Appendix A
NOTE RULE:
RSS-133 section 5.3
The manufacturers rated output power of this equipment is for single carrier operation. For situations when
multiple carrier signals are present, the rating would have to be reduced by 3.5dB, especially where the out-put
signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of
input power or gain reduction and not by an attenuator at the out-put device
FCC/IC RF Exposure Requirements
FCC antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51.61
centimetres (cm) (20.32 inches) from all persons, and must not be co-located or operating in conjunction with
any other antenna or transmitter.
Any modifications to this device will void FCC and IC approvals
APPENDIX B
RETURNED GOODS PROCEDURE
B1. Technical Information
Contact Telcosat Inc or your supplier to determine whether or not an item should be returned for repair.
Contact Telcosat Inc 403 291 4031
Email, [email protected]
B2. Return Identification
Please provide the following information with each repair.
Date of requested repairs.
Customer name with full address for returning goods
Contact person responsible for returning the product for repairs
Client telephone number
Serial number
Original purchase date
Reason for return.
B3. Shipping Procedure
Ship all returned goods PREPAID to the following address:
