TELCOSAT RPT 900
Document use is restricted to that described on cover
18
LOCAL NETWORK SETUP
4.10
The local network set-up screen allows the user to modify the network setup.
Enter the new information into each box and click the Save Settings box.
Verify the settings in the System Status page.
The user must record the network settings for future reference and access requirements.
4.11
RESETTING THE IP/NETWORK MASK DEFAULT
In the even the IP/Network information is not available then a manual reset has to be performed on the
repeater.
Remove the 10 Allen Head type bolts, use an 8 mm Hex Key wrench.
There is a small push button, press and hold for 5 seconds.
The default IP will be reset to 192.168.1.100
The default Network Mask will be reset to 255.255.255.0
See attached image to locate the RESET BUTTON.
