TELCOSAT RPT 900
Document use is restricted to that described on cover
13
CHAPTER 4
CONNECTING THE RBB850 REPEATER TO A COMPUTER OR NETWORK
4.1
The default IP address of the Repeater
IP 192.168.1.100
NETWORK MASK
255.255.255.0
To connect your computer to the repeater you need to configure your network card in your computer to
the following IP
IP 192.168.1.99
NETWORK MASK
255.255.255.0
Start your Internet Browser, for example Windows Internet Explorer.
In the browser address bar type in,
http://192.168.1.100
REPEATER LOGIN SCREEN
4.2
The Repeater log in page should appear. See image below.
REPEATER LOGIN PAGE
The default log in password for the Administration is “
telcosat
“
The default log in password for the Monitoring password is “
telcosat
“
You can change the password in the System Setup Screen.
The repeater will allow two levels of password.
The Monitor Password only allows the user to view the details and cannot make any adjustments.
The Administrator Password allows the user to make all adjustments to the repeater and also change
password settings.
