background image

TELCARE

 Blood Glucose Monitoring System

References

1. American Diabetes Association. Standards of Medical Care in Diabetes—2008. Diabetes Care. 2008;31:S12–S54.

28

Understanding Your Blood Glucose Test Results

Blood glucose value will vary depending on food intake, medication, health, 
stress, and exercise. The ideal ranges for people without diabetes are as 
follows

1

:

n

 70 to 100 mg/dL before meals, and

n

 70 to 140 mg/dL after meals

What to do if you get a high or low reading AND you 
feel ill.

If the Telcare BGM

 displays results that are “High” or “Low,” or you get a 

result that is more than 250 mg/dL or below 50 mg/dL 

AnD

 you feel ill:

n

 Treat your diabetes according to the instructions from your doctor.

If the Telcare BGM displays results that are “High” or “Low,” or you get a 
result that is more than 250 mg/dL or below 50 mg/dL 

AnD

 you 

Do noT

  

feel ill:

n

 Test your Telcare BGM with a control solution, refer to page 8, ”Step by 

Step Guide to Control Testing.”

n

 Wash your hands, dry thoroughly and test again using your fingertip. 

If you still get a high or low reading, contact your doctor.

Summary of Contents for TCTM0001

















































Reviews: