www.tekvox.com
4K PTZ Camera
79068-4K-12 User Manual
1. Camera Installation
1.1 Camera Interfaces
1. Remote Control Receiving Indicator
8. Rotary DIP Switch
2. Camera Lens
9. RS-232 Control Interface (input)
3. Tripod Screw Hole
10. RS-232 Control Interface (output)
4. Screw Hole for Tripod
11. RS-422/485 Input
5. Power Switch
12. Audio Input Interface
6. DC 12V Input Power Supply Socket
13. USB 3.0 Interface
7. LAN Port
14. HDMI Video Output Port
1.2 Power-On Initial Configuration
Power-on: Connect DC12V power supply adapter with power supply socket
Initial Configuration: The remote control receiving indicator flashes after power on, the pan-tilt turns
left to the lowest left to the lowest, and then turns to the HOME position (both the horizontal and
vertical positions are in the middle), while the movement first shrinks and then stretches. When
remote control receiving indicator stops flashing, self-checking has completed.
Notes:
After power on and self-checking, the camera will automatically return to the preset 0 position
if it’s pre-set.
The default address for the IR remote control is 1. If the menu is restored to factory defaults,
the remote control default address will restore to 1.
1.3 Video Output
1.3.1 Network Output
Connect network cable as shown by Item 7 of §1.1 Camera Interfaces
