www.tekvox.com
4K PTZ Camera
79068-4K-12 User Manual
3) RTP Broadcasting
Main/Sub stream: On/off
Protocol: RTP or TS
Address (Default): “224.1.2.3”. It can be edited.
Port: main Stream Default Port: 4000, Sub Stream Default Port: 4002
Visit: address comes up after setting. E.g ; rtp: //224.1.2.3:4000; udp: //@224.1.2.3:4000
4) Video Parameters
Focus: set the focus mode, focus range, and focus sensitivity
Focus mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower optional)
Focus sensitivity: set the focus sensitivity (default is low, high, medium optional)
Exposure: exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit,
wide dynamic, shutter speed, aperture value and brightness can be set.
Exposure mode: set the exposure mode (the default automatic, manual, shutter priority, aperture
priority, Brightness priority optional)
Exposure compensation: exposure compensation setting is active when it is auto status (default is
off).
Exposure compensation value: set the exposure compensation value, valid when it is set for auto
(default 0, -7 to 7 optional).
BLC: set back light compensation, valid when it is in auto status (default is off).
Anti-flicker: set up anti-flicker mode, valid when status is automatic, aperture or brightness priority
(default 50Hz, closed, 60Hz optional).
Gain limit: set the gain limits, auto, active when it is status of aperture or brightness priority (default
4, 0-15 optional).
Dynamic range: set the dynamic range (default 4, 1-8 optional).
Shutter speed: Active when it is status of manual or shutter-priority (default 1/100, 1/25, 1/30, 1/50,
1/60, 1/90, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/1000, 1/2000, 1/3000, 1/4000, 1/6000,
1/10000 optional).
Aperture value: set the aperture value, active when it is status of manual or aperture-priority (default
F1.8, closed F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.8 optional).
Brightness: Set the brightness value, active when it is a state of brightness priority (default 7, 0-23
optional).
Color: white balance, saturation, color, white balance, sensitivity, color temperature, gain red and
blue gain can be set.
White balance modes: set the white balance mode (the default automatic, 3000K, 3500K, 4000K,
4500K, 5000K, 5500K, 6500K, 7000K manual, One-push optional).
Note: Click the “Correction” button when the One-push white balance mode is selected.
Red fine-tuning: default -10~10 (only available in automatic mode)
Blue fine-tunable: default -10~10 (only available in automatic mode)
Saturation: set the saturation (default 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, 140%, 150%,
160%, 170%, 180%, 190%, 200% optional).
