www.tekvox.com
4K PTZ Camera
79068-4K-12 User Manual
Automatically after changed and saved (default 48; 28-200 optional)
Secondary stream character size: Set the character size of the display, the device will restart
automatically after changed and saved (default 48; 28-200 optional)
Click on the "Save" button to display "Parameter saved successfully" message, and set to take effect.
6) Video output
Output format: 3840x2160P60, 3840x2160P50, 3840x2160P30, 3840x2160P25
1080P60, 1080P50, 1080P30, 1080P25, 1080I60, 1080I50, 720P60, 720P50
Click on the "Save" button, it will be valid when display "Save successful".
4.2.6 Network Configuration
1) Network port
Data port: set the data port, the device will restart automatically after changed (default 3000; 0-
65535 optional)
Web port: Set Web port, the device will restart automatically after changed (default is 80; 0-65535 is
optional)
Onvif port: Set Onvif port, the device will restart automatically after changed (default 2000, 0-65535
optional)
Soap port: Set Soap port (default 1936, 0-65535 optional)
RTMP port: Set RTMP port (default 1935, 0-65535 optional)
RTSP port: Set RTSP port, the device will restart automatically after changed (default 554, 0-65535
optional).
Visca port: Set Visca port, the device will restart automatically after changed (default 3001,0-65535
optional).
Click on the "Save" button, it will be valid when it displays "Save successful".
RTSP obtaining method: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary
stream)
RTMP obtaining method: rtmp: // device IP address: 1935 / live / av0 (av0 main stream; av1
secondary stream)
2) Ethernet Parameters
DHCP: enable or disable obtain IP automatically can be set. Save changes and reboot the device to
take effect (default: OFF).
IP address: set the IP address, save changes and reboot the device to take effect (default
192.168.5.163). Note: This IP address is the same with the one used to login Web page.
Subnet mask: set the subnet mask (default 255.255.5.0).
Default gateway: set the default gateway (default 0.0.0.0).
Physical address: set the physical address (the parameter is read-only but cannot be modified).
Click on the "Save" button, it will be valid when display "Save successful". (Note: To prevent IP
conflicts When modify)
