www.tekvox.com
4K PTZ Camera
79068-4K-12 User Manual
Input volume: set the input volume (default 2, 1-10 optional)
Click “Save”, and it will remind Enable has changed. Restart the device to take effect after saving.
Reboot the camera for the settings to come into effect.
4.2.5 Video Configuration
1) Video Encoding
Code stream: configure video output settings (Main stream, secondary stream)
Compression format: set the video compression format. Save and reboot to take effect
(main/secondary stream default: H.264, H.265 optional)
Profile: set Profile mode (default HP, BP, MP Optional)
Video size: set video image resolution. Save and reboot for changes to take effect (main stream
default 1920*1080 3840*2160, 2592*1944, 2304*1296, 1920*1080, 1280*720 optional; default
secondary stream 320*180, 640*360,320*240, 640*480,320*180, 1280*720 optional)
Stream rate control: set the rate for control mode. Save and reboot to take it effect (main/secondary
stream default variable bit rate, fixed rate is for option).
Image quality: set the image quality, image quality can be changed only when rate control is variable
bit rate, (main stream defaulted is better, secondary stream default is not good, there are best, better,
good, bad, worse, worst for options).
Rate (Kb/s): set the video bit rate (main stream default 8192b/s, 64-40960Kb/s optional; secondary
stream default 512Kb/s, 64-40960Kb/s optional).
Frame rate (F/S): set the video frame rate (main/secondary stream default 25F/S, main stream 5-
60F/S optional, secondary stream 5-30F/S optional).
Key frame interval: set the key frame interval (main/secondary stream default 100, main stream 1-
300F optional. secondary stream 1-150F optional).
Stream name: when streaming via rtsp or rtmp, users can modify the stream’s name. Main Stream
(live/av0), secondary stream (live/av1)
Click the "Save" button to display the "saved successfully" message, then settings take effect.
2) Stream Release
Switch: To turn on/off the main/secondary stream.
Protocol: primary / secondary stream applies RTMP protocol.
Host port: server port number (default 1935, 0-65535 optional)
Host address: server IP addresses (default 192.168.5.11)
Stream name: choose a different stream name (live / av0, live / av1 optional).
User: set the user name.
Password: set the password.
Click on the "Save" button to display the "Save successful" message, then the settings take effect.
Method of obtaining RTSP: RTSP: // device IP address: 554 / live / av0 (av0 main stream; av1
secondary stream)
