Tektronix WFM8200, Service Manual

Page: 69 / 85

Removal and Replacement Procedures
Figure 4-5: Front panel and fan cable connections
Remove the bezel from the LCD assembly.
Remove to bezel from the front panel
assembly to access the front panel board. (See Figure 4-6 on page 4-30.)
4. Remove the two T-10 screws that secure the LCD Assembly to the display
bracket.
5. Use a Phillips screwdriver to remove the two Pozidriv screws securing the
bottom of the bezel to the display bracket.
6. Tilt the bottom of the display bracket up and slide the display brackets out
from underneath the bezel clips, leading the front panel cable through the
cutout in the bracket.
WFM8200 and WFM8300 Waveform Monitors Service Manual 4–29