Tektronix WFM8200, Service Manual

Page: 70 / 85

Removal and Replacement Procedures
Figure 4-6: Front panel disassembly
Remove the front panel board from the bezel.
The front panel board can be
removed from the bezel and replaced, if needed. (See Figure 4-7 on page 4-30.)
1. Remove the three knobs from the front panel.
2. Remove the one T-10 screw that secures the front panel to the bezel.
3. Use a
3
/
16
inch nutdriver to remove the two jackscrews that secure the front
panel board to the bezel.
4. Lift the front panel board away from the bezel.
Figure 4-7: Front panel board removal
4–30 WFM8200 and WFM8300 Waveform Monitors Service Manual