Tektronix VX1411A IntelliFrame VXIbus Mainframe Instruction Manual Download Page 70

Page: 70 / 130

Maintenance

VX1411A IntelliFrame Mainframe Instruction Manual

4–5

Remove screws (12)

Step 1

Step 2

Step 3

Figure 4–2: Removing the mainframe cover

To remove the VX1411A fan assembly refer to Figures 4–3, 4–4 and 4–5 while
performing the following steps:

1. Loosen the fan cable channel captive screw, and remove the cable channel.

2. Unplug the cables.

3. Remove the Chassis Ground screw (if installed) using a T-20 tip .

4. From the back of the mainframe, loosen the five captive screws using a

Phillips screwdriver. Refer to Figure 4–3 for screw locations.

5. Remove the fan assembly from the instrument and set aside on a clean

working surface.

6. Remove the fan filter from the fan assembly.

Procedure 2: Removing

the Fan Assembly

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for VX1411A IntelliFrame VXIbus Mainframe



































































































































Search results

Summary of Contents for VX1411A IntelliFrame VXIbus Mainframe

Reviews:

Related manuals for VX1411A IntelliFrame VXIbus Mainframe

Brands by name

Popular brands

Tektronix VX1411A IntelliFrame VXIbus Mainframe, Instruction Manual

Search results

Summary of Contents for VX1411A IntelliFrame VXIbus Mainframe

Reviews:

Related manuals for VX1411A IntelliFrame VXIbus Mainframe

Brands by name

Popular brands