Tektronix VX1411A IntelliFrame VXIbus Mainframe Instruction Manual Download Page 12 | Manualshive

Page: 12 / 130

background image

VX1411A IntelliFrame Mainframe Instruction Manual

vii

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it. To avoid potential hazards, use this
product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the system. Read
the General Safety Summary in other system manuals for warnings and cautions
related to operating the system.

Use Proper Power Cord.

Use only the power cord specified for this product and

certified for the country of use.

Ground the Product.

This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings
information before making connections to the product.

The common terminal is at ground potential. Do not connect the common
terminal to elevated voltages.

Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.

Do Not Operate Without Covers.

Do not operate this product with covers or panels

removed.

Use Proper Fuse.

Use only the fuse type and rating specified for this product.

Avoid Exposed Circuitry.

Do not touch exposed connections and components

when power is present.

Do Not Operate With Suspected Failures.

If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation.

Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

To Avoid Fire or

Personal Injury

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
10
11
12
13
14
...
»

Summary of Contents for VX1411A IntelliFrame VXIbus Mainframe



































































































































Reviews:

No comments

Related manuals for VX1411A IntelliFrame VXIbus Mainframe

Supero SC808T-980B

Brand: Supermicro Pages: 66

Brand: Blonder tongue Pages: 12

Brand: National Instruments Pages: 4

Brand: Planet Pages: 51

Isilon IQ 32000X-SSD

Brand: Isilon Systems Pages: 40

Brand: adept technology Pages: 62

IES-5000 Series

Brand: ZyXEL Communications Pages: 72

Brand: Netstor Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands