Tektronix TSG 95, Service Manual

Page: 58 / 140

Operating Information
2–4
TSG 95 Service Manual
H
The TSG 95 can sense low battery voltage. It will warn you when the charge
is sufficient for approximately ten more minutes of operation. The instru-
ment will shut itself down when the battery voltage becomes too low for
reliable operation. For proper function of these features, the Battery Type
must be set correctly in the Utility menu. Please see “Setting the Battery
Type,” below.
The ON key toggles instrument power On and Off.
Connecting the TSG 95
Connect the instrument to your equipment as you would any television test sig-
nal generator. Use 75
W
coaxial cable (for video) and be sure that the signal path
is properly terminated.
1 2
3
Pin 1 = GND
Pin 2 = POS (+)
Pin 3 = NEG (–)
You may wish to confirm proper operation of your TSG 95—and gain familiarity
with it—by first connecting it directly to a video or waveform monitor.
Keypad and Display Conventions
Please see the Instruction card (p/n 070-8915-XX) supplied with your TSG 95
for a “tour” of the keypad and an explanation of the display symbols. For your
convenience, the following panels are excerpted from the card.