Tektronix TLA7AA Series, Service Manual

Page: 96 / 116

TLA7AXX/TLA7NAX Logic Analyzer Module Service Manual
6- 41
Repackaging Instructions
This section contains the information needed to repackage the logic analyzer
module for shipment or storage.
Packaging
If at all possible, use the original packaging to ship or store the instrument. If the
original packaging is not available, use a corrugated cardboard shipping carton
having a test strength of at least 275 pounds (125 kg) and with an inside
dimension at least six inches (15.25 cm) greater than the instrument dimensions.
Add cushioning material to prevent the instrument from moving around in the
shipping container. Seal the shipping carton with an industrial stapler or
strapping tape.
Shipping to the Service Center
Contact the Service Center to get an RMA (return material authorization)
number, and any return or shipping information you may need.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
H
The RMA number.
H
The owner’s address.
H
Name and phone number of a contact person.
H
Type of instrument and serial number.
H
Reason for returning.
H
A complete description of the service required.
NOTE
. When ordering the LPU board for exchange or repair, you will need to
supply the above information, including the firmware level and PowerFlex
configuration information.
Mark the address of the Tektronix Service Center and the return address on the
shipping carton in two prominent locations.